This Velo Low Profile Airmover delivers restoration-grade air movement in a highly portable package. Includes multiple operation positions. Dry floors, ceilings, walls and stairways quickly and efficiently. Also includes an easy-carry handle.
Pneumatic, Hardwood Flooring Stapler. Use to install 3/4" solid hardwood flooring, Uses Bostitch #BCS1512, True Value #406231, #BCS1514, True Value #406256, & #BCS1516, True Value #406280 Staples.
14 in. wide aluminum pin plate with 59 adjustable nickel plated pins. Non-marring tail block. Includes 4 tubing sections for operating length from 34 1/2 to 22 ft. Additional tubing can be added for longer stretches.
*2 units for sale
REMOVES GUMMY COATINGS FROM ALL CONCRETE SURFACES.
GRINDS THROUGH: PAINT, CARPET & TILE ADHESIVES, EPOXY COATINGS, CARPET PADDING.
MOUNTS TO RUBBER FACED DRIVE DISC ON 17" POLISHER.
Sheet Abrasive Mesh Screen 12 x 18 120-grit
Discs Abrasive Mesh Screen 17 120-grit
Discs Abrasive Mesh Screen 17 100-grit
Discs Abrasive Mesh Screen 17 80-grit
Discs Abrasive Mesh Screen 17 60-grit
Discs Abrasive Mesh Screen 13 120-grit
Discs Abrasive Mesh Screen 13 100-grit
Discs Abrasive Mesh Screen 13 80-grit
Discs Abrasive Mesh Screen 13 60-grit
The 470 Portamatic TL pneumatic flooring nailer is designed to nail ¾” thick wood flooring and includes a shoe pad for nailing ½” wood flooring. Designed to accept 1-1/ 2 or 2” Flooring nails T. Operates at 70-90 PSI @ 3.5 cfm. A light tap of the mallet ensures the Porta-Nail is set tight in the proper location every time for a wood floor that stays put. The Portamatic TL is light weight; easy to use has an integrated safety to prevent accidental discharge. Porta-Nails 16 ga. flooring nails are made of the finest materials and well defined serrated barbs to provide superior holding power and will not let go.
Porta-Nails 418A Portamatic Evolution is designed to give you tight floors and exact nail placement for 3/8" to 5/8" Engineered and Horizontal or Vertical Grain Bamboo flooring requiring the use of an 18 ga nail to reduce the risk of splitting the tongue of the wood or dimpling the top prefinished surface. (Nails are available in lengths of 1-1/4 In. # 41801 and 1-1/2 In. # 41802) Today’s imported and prefinished floors need special attention for the nail placement and protecting the top edge of the factory finish. The 418A delivers with an 18 ga nail and adjustable base plate second to none. First, it sets against the front of the tongue, reducing the risk of damaging the top edge of the flooring. Second, it features a shim-less height adjustment through the action of an easy to adjust cam mechanism.