Tan Buffer Pads 17" x 1/4"
Pads Green Scrub 17x1
Pads Black Stripper 17 x 1
Pads White Polish 13 x 1
Pads Green Scrub 13x1
Pads Black Stripper 13 x 1
Sheet Abrasive Mesh Screen 12 x 18 120-grit
Discs Abrasive Mesh Screen 17 120-grit
Discs Abrasive Mesh Screen 17 100-grit
Discs Abrasive Mesh Screen 17 80-grit
Discs Abrasive Mesh Screen 17 60-grit
Discs Abrasive Mesh Screen 13 120-grit
Discs Abrasive Mesh Screen 13 100-grit
Discs Abrasive Mesh Screen 13 80-grit
Discs Abrasive Mesh Screen 13 60-grit
2" 1hp electric dewatering pump, slimline pump designed to pump high (60') with greater volume. Designed for extended dry run capability and to fit in an 8 hole
Unmatched as a good all around contractor lift, the Series 2100 features taller mast to reach desired work heights while requiring fewer mast sections. hence, the 2100 is less expensive and lighter. The base, forks, winch, etc. are the same as the 2000. It's ideal for compact storage.
Gas Powered direct drive Pressure washer. This unit is a high quality, high performance machine that appeals to both professionals and casual users. Great for painters and professionals of all types. Comes with pneumatic tires and downstream detergent injection.
*2-4 units available
The 470 Portamatic TL pneumatic flooring nailer is designed to nail ¾” thick wood flooring and includes a shoe pad for nailing ½” wood flooring. Designed to accept 1-1/ 2 or 2” Flooring nails T. Operates at 70-90 PSI @ 3.5 cfm. A light tap of the mallet ensures the Porta-Nail is set tight in the proper location every time for a wood floor that stays put. The Portamatic TL is light weight; easy to use has an integrated safety to prevent accidental discharge. Porta-Nails 16 ga. flooring nails are made of the finest materials and well defined serrated barbs to provide superior holding power and will not let go.
Porta-Nails 418A Portamatic Evolution is designed to give you tight floors and exact nail placement for 3/8" to 5/8" Engineered and Horizontal or Vertical Grain Bamboo flooring requiring the use of an 18 ga nail to reduce the risk of splitting the tongue of the wood or dimpling the top prefinished surface. (Nails are available in lengths of 1-1/4 In. # 41801 and 1-1/2 In. # 41802) Today’s imported and prefinished floors need special attention for the nail placement and protecting the top edge of the factory finish. The 418A delivers with an 18 ga nail and adjustable base plate second to none. First, it sets against the front of the tongue, reducing the risk of damaging the top edge of the flooring. Second, it features a shim-less height adjustment through the action of an easy to adjust cam mechanism.
The Porta Nailer Pro (410) manual flooring nailer will blind nail 5/8” and 3/4” Domestic Hardwood Flooring. The 410 can be used for 9/16” and 33/32”. Multi-hit functionality minimizes installer fatigue and insures greater impact and floor tightness. The 410 Nailer can use T style 16 gauge barbed flooring cleat nails in lengths of (T Nails: 2”, 1-1/2” and 1-3/16”) . The Porta Nailer Pro uses an integrated bypass pusher system and delivers extra protection to Pre Finished Floors with a Shoe Base System that position in front and on top of the flooring for perfect tool balance and protection of the top flooring edge. Made in the USA.
13 Gal 1.3HP 110V Wet/Dry Vacuum, 2 Stage Blower Motor For Longer Life, Self Cooling Motor Design
2400 PSI, 196cc Honda GX200 OHV With Low Oil Shut Down, 2.4 GPM
A large selection of blades is available for purchase.
The Husqvarna K760 is a powerful all-round power cutter with features that make it one of the best power cutters on the market. The K760 is outfitted with an X-Torq® engine that reduces emissions up to 75% and lowers fuel consumption by 20%.